Ukraine KrAZ-6446 Tractor with MAZ/ChMZAP-5247G semitrailer 85513

Product introduction:
The KrAZ-6446 tractor truck was developed in Ukraine by AvtoKraz. It was developed from the KrAZ-6322 6×6 heavy utility truck. It is a successor to the previous KrAZ-260V. Vehicle is designed to operate on all kinds of roads.
The KraZ-6446 is intended to haul semi-trailers. It can operate on all kinds of roads and in off-road condition. Fifth-wheel permissible vertical load is 11.4 t. Vehicle can tow a semi-trailer with a maximum weight of 23 t on all kinds of roads and up to 34 t on hard surface roads.
This Ukrainian tractor truck is used to transport armored vehicles or heavy construction equipment. It is also used to haul semi-trailers with the S-300PMU-1 air defense missiles.
Design of this military truck is simple and robust. The KrAZ-6446 is powered by Russian YaMZ-238D turbocharged diesel engine, developing 330 hp. Vehicle is also proposed with improved YaMZ-238DE2 diesel engine, which meets EURO II emission requirements. This tractor truck shares a number of automotive components with the KrAZ-6322 heavy utility truck.

Item No 85513
Item Name Ukraine KrAZ-6446 Tractor with MAZ/ChMZAP-5247G semitrailer
Bar Code 6939319255136
Scale 1:35
Item Type Plastic Model Armor Kit
Model Dimension Length: 606.1mm Width: 92mm
Total Plastic Parts 660+
Total Sprues 20 sprues and semi-trailer board
Chromeplate Parts n/a
Resin Parts n/a
Metal Parts n/a
Photo Etched Parts 3 pcs
Film Accessory n/a
Released Date 2017-10
More Features > Full drive train assembly complete with engine transmission, differential housing and suspension units.
> The main tires are hollow rubber with very good tread pattern
> Wheel hubs are in great details
> The windshield and side windows are mad

---

 

Geschutzwagen 82923
Model:82923
The proportional model:1:72

Product introduction:
For the armored train units of Type BP42, the artillery was increased, following Russian and Polish examples, to four guns, which were not, though ,mounted two to a car as in the latter types, but one per separately built ten-sided rotating turret, in order to avoid too-great losses from a direct hit. The two halves of the train, before and behind the locomotive were identical and consisted of one artillery car with one 10cm le.F.H 14/19(p) gun, one command and infantry car and one artillery and anti-aircraft car with one 7.62cm F.K.295/l(r) and one 2cm anti-aircraft quadruple unit.

Item No 82923
Item Name Geschutzwagen
Bar Code 6939319229236
Scale 1:72
Item Type Plastic Model Armor Kit
Model Dimension Length: 594.3mm Width: 81.7mm
Total Plastic Parts 70+
Total Sprues 3 sprues , hull and turret
Chromeplate Parts n/a
Resin Parts n/a
Metal Parts n/a
Photo Etched Parts n/a
Film Accessory n/a
Released Date 2017-10
More Features The kit consists of over 70 parts with 4 section
roadbeds
-Newly tooled parts in accurate detail

---

A-4F Sky Hawk 81765
The proportional model:1:48

Product introduction:
The A-4 Skyhawk was designed by Douglas in response to a U.S. Navy call for a jet-powered attack aircraft to replace the older A-1 Skyraider. Douglas opted for a design that would minimize its size, weight, and complexity. The result was an aircraft that weighed only half of the Navy’s weight specification. It had a wing so compact that it did not need to be folded for carrier stowage.
A-4F refinement of A-4E with extra avionics housed in a hump on the fuselage spine (this feature later retrofitted to A-4Es and some A-4Cs) and more powerful J52-P-8A engine with 9,300 lbf (41 kN) of thrust, later upgraded in service to J52-P-408 with 11,200 lbf (50 kN), 147 built. Some served with Blue Angels acrobatic team from 1973 to 1986

Item No 81765
Item Name A-4F Sky Hawk
Bar Code 6939319217653
Scale 1:48
Item Type Plastic Model Aircraft Kit
Model Dimension Length: 274mm Wingspan: 174mm
Total Plastic Parts 320+
Total Sprues 10 sprues
Chromeplate Parts n/a
Resin Parts n/a
Metal Parts n/a
Photo Etched Parts n/a
Film Accessory n/a
Released Date 2017-10
More Features the kit consists of over 320 parts , includes clear parts
for canopy.
-Detailed fuselage&wing w/accurate design

---

 

Russian MiG-31M Foxhound 81755
The proportional model:1:48

Product introduction:
The Mig-31 ‘Foxhound’ was developed as the replacement of the Mig-25 ‘Foxbat’,the prototype Ye-155MP took the first flight on 16 September 1975.As the heaviest fighter/interceptor in the world,the Mig-31 is much heaver than other similar aircrafts.At the same time,tow powerful D-30-F6 engines and a stronger airframe gave it a top speed to Mach 2.8 at high-altitude and Mach 1.23 at low-altitude.
In order to apply the lastest ultra-long-range AAMs,the Mikoyan OKB started to develop a new version which named as the Mig-31M under the joint directive issued of the Communist Party Central Committee and the Council of Ministers.The new design applied made the Mig-31M can be easily distinguished from other versions.7 prototypes were complet-ed.However,the program were canceled after the break-up of the Soviet Union.

Item No 81755
Item Name Russian MiG-31M Foxhound
Bar Code 6939319217554
Scale 1:48
Item Type Plastic Model Aircraft Kit
Model Dimension Length: 472.3mm Wingspan: 280.3mm
Total Plastic Parts 370+
Total Sprues 30 sprues , tires and fuselage
Chromeplate Parts n/a
Resin Parts n/a
Metal Parts gear strut
Photo Etched Parts 1 piece
Film Accessory n/a
Released Date 2017-10
More Features the kit consists of over 370 parts
-Detailed fuselage&wing w/accurate design
-Detailed cockpit
-metal undercarriage
-rubber tires
-photo etched parts included

---

 

Marder III Ausf.M Tank Destroyer Sd.Kfz.138 – Early 80169
The proportional model:1:35

Product introduction:
The last Marder III variant was based on the Geschützwagen 38(t) Ausf. M, a purpose-designed vehicle for self-propelled gun use, again armed with the 75 mm PaK 40 anti-tank gun. Ausf. M was the final variant of the Marder series and was a significant improvement over previous models, with its lower silhouette, sloped armor and much more functional fighting compartment. In this variant, the engine was moved from the rear to the middle between driver and the rest of the crew. Because there was no engine in the rear, the gun and the crew did not have to sit on top of the engine deck as in previous models. The fighting compartment could be lowered down to the bottom floor level where the engine used to be, which decreased crew exposure, as well as visibility. Unlike the previous two Marder IIIs, the fighting compartment was closed at the rear, protecting the crew up to their midsection. It stayed open-topped. It could carry only 27 rounds of ammunition. The machinegun port at the front was eliminated in the Ausf. M in favor of an MG 34 or MG 42 carried by the crew.

Item No 80169
Item Name Marder III Ausf.M Tank Destroyer Sd.Kfz.138 – Early
Bar Code 6939319201690
Scale 1:35
Item Type Plastic Model Armor Kit
Model Dimension Length: 148.2mm Width: 61mm
Total Plastic Parts 500+
Total Sprues 10 sprues and lower hull
Chromeplate Parts n/a
Resin Parts n/a
Metal Parts gun barrel
Photo Etched Parts 1 piece
Film Accessory n/a
Released Date 2017-10
More Features The kit consists of over 500 parts
>the kit w/refined detail
>multi-slide moulded lower hull , turret
>individual tracks
>photo etched parts included

---