NEW FROM trumpeter-china 450 Engineering Medium Tank 09580

product description:

      The 450 project is an attempt by Morozov to envision future tank design. As the chief designer of the T-64 tank, he is writing about his forward-looking concepts for the development of new tanks. In his diary, he described this The tank is called NST-74, 450 Project or T-74.

      The development of the car began in the early 1970s, under the responsibility of the Kharkiv Design Bureau. As the NST-74 (new medium tank-74), its design concept was too advanced to the extent that the Soviet Union’s industrial capabilities at that time This tank was put into production in the 1970s. The design of the T-74 was found to have many shortcomings since 1972. In 1973, the design concept was further improved, and it had a more ideal gunner position than when it was designed in 1972 (and further improvements were made in 1974). Other improvements include gun installation position, ammunition storage, fire control bus, and crew position. If this new tank goes into production, it will surpass the new Leopard and XM-801 tanks.

Product number                   09580

product name       450 engineering medium tank

Bar code                  9580208095806

Product ratio          1:35

product type          Plastic Model Armor Kit

Model size              Length: 262.5mm Width: 79.9mm 

Total number of parts        200+

Metal parts             copper cable

Etched parts           1 piece

Film            n/a

Resin parts              n/a

Total number of offsets     7 sprues, lower hull and upper hull

Announced date                  2020-11

More description                 The kit consists of over 200 parts

>the kit w/refined detail

>multi-slide moulded lower hull and turret

>plastic tracks w/fine detail

NEW FROM trumpeter-china Chinese Navy Type 051C guided missile destroyer 06731

product description:

      The overall design of the Type 051C guided missile destroyer looks like an enlarged Type 051B destroyer. The most notable feature of the ship is that it is equipped with a Russian-made Reeve vertical air defense missile system. Each Reeve device contains 48 vertically launched anti-aircraft missiles. Missile range120km. Its fire control system is a top-plate phased array radar, which can simultaneously guide 12 missiles against 6 targets. In addition, equipped with 8 “Eagle Strike-83″Anti-ship missile launcher, two 730 near-anti-cannons are installed in the middle of the hull.

Product number    06731
product name    Chinese Navy Type 051C guided missile destroyer
Bar code    9580208067315
Product ratio    1:700
product type    Plastic Model Warship Kit
Model size    Length: 220.6mm Beam: 24.2mm 
Total number of parts    110+
Metal parts    n/a
Etched parts    1 piece
Film    n/a
Resin parts    n./a
Total number of offsets    4 sprues, lower hull and superstructure
Announced date    2020-11
More description    -hull made from multi-directional slide moulds.
-Contains display stand and engraved name plate
-Photo-Etched parts included

NEW FROM trumpeter-china 1/200 German battleship Scharnhorst 03715

product description:

      The battleship Scharnhorst is the first ship of the Scharnhorst class. The ship type is divided into battlecruisers. The initial design can be replaced with 380mm main guns and jumped into battleships to cope with future battles, but there was no such thing in World War II. Implement. The Scharnhorst was built by the War Naval Shipyard in Wilhelmshaven, Germany. It was launched on October 3, 1936, and entered service on January 7, 1939.

      In 1938, the Scharnhorst class found insufficient freeboard at the bow of the ship during sea trials, and docked the bow in 1939. After the outbreak of World War II, in 1940, the two ships of the Scharnhorst class sank the Royal Navy’s aircraft carrier HMS Glory and two destroyers in the North Sea, but the Scharnhorst was hit by torpedoes fired by British destroyers and caused a large number of them. Water can only be docked for maintenance later.

      In 1941, the Scharnhorst broke into the Atlantic Ocean for a sea-breaking operation. During the two-month operation, the fleet sank 22 merchant ships with a gross tonnage of 115,000 tons, which greatly damaged the shipping of the allied countries.

      On December 25, 1943, Scharnhorst set sail to attack the Allied escort convoy. It was intercepted by the main Royal Navy’s main fleet headed by the Duke of York battleship. It was attacked by British forces and was eventually sunk by the Duke of York.

Product number                   03715

product name       German battleship Scharnhorst

Bar code                  9580208037158

Product ratio          1:200

product type          Plastic Model Warship Kit

Model size              Length: 1175mm Beam: 150mm

Total number of parts        1600+

Metal parts             anchor chain, shaft

Etched parts           6 pcs

Film            n/a

Resin parts              n/a

Total number of offsets     25 sprues, hull, superstructure and decks

Announced date                  2020-11

More description            

-One     -piece hull made from two-directional slide molds -Deck pattern finely rendered.

-Accurately detailed gun

-6 pieces of photo etched frets for handrais, ladders, radar parts etc.

-includes 2 Ar196 waterplane

NEW FROM trumpeter-china Ukrainian T-64BM “Blot” main battle tank 09592

product description:

      The T-64BM “Blot” is the Ukrainian upgraded version of the Soviet T-64B main battle tank. After the end of the Cold War, Ukraine has equipped and stocked more than 2,200 T-64 main battle tanks. The T-64BM “Blot” main battle tank was announced in 1999. Initially, the Ukrainian Mortsov Mechanical Design Bureau proposed two upgrade plans for the T-64 main battle tank. One is the T-64BM (also known as T-64U) and the other is T-64BM2. T-64BM2 is equipped with a new automatic loader, but it is equipped with a poor fire control system. In the end, the Ukrainian army chose a higher T-64BM standard to upgrade its equipment to T-64. In 2005, the first T-64BM tank was upgraded and delivered to the Ukrainian army. Starting in 2014, the upgraded T-64BM main battle tank, like other tanks and armored vehicles in Ukraine, participated in the military conflict in Ukraine. Widely used in conflicts. However, for some reason, all the surviving T-64BM tanks of the Ukrainian army have recently been repaired and put into storage. The Ukrainian military decided not to use these tanks in the conflict and rely on the old T-64BV tanks.

      The improvement of protection depends on the external explosive reactive armor. Composite armor is used in front of the hull and turret. The T-64BM tank is equipped with Ukrainian “knife” reactive armor, which can provide better protection. The vehicle is also equipped with three protection equipment and automatic fire extinguishing and explosion suppression system.

Product number                   09592

product name       Ukrainian T-64BM “Blot” main battle tank

Bar code                  9580208095929

Product ratio          1:35

product type          Plastic Model Armor Kit

Model size              Length: 261mm Width: 110 mm

Total number of parts        740+

Metal parts             copper cable, brass wire

Etched parts           2 pcs

Film            n/a

Resin parts              n/a

Total number of offsets     22 sprues, lower hull and turret

Announced date                  2020-11

More description                 The kit consists of over 740 parts

>the kit w/refined detail

>multi-slide moulded turret and lower hull

>plastic tracks w/fine detail

>Etched Photo parts included

NEW FROM trumpeter-china 1/72 Chinese People’s Liberation Army ZTZ-99A Main Battle Tank 07171

product description:

      As the trump card of China’s main battle tank, the ZTZ-99A tank was reviewed during the military parade held in Tiananmen Square in Beijing on the morning of September 3, 2015. This is the first public appearance of the ZTZ-99A main battle tank, although its name has been circulating for a long time. During the “Peace Mission-2014” SCO military exercise, its maneuverability, power and speed shocked the entire world.

      In addition to its turret equipped with a new generation of explosive reactive armor, a new additional composite armor was also installed on the top of the turret. In addition, the laser active defense system greatly enhances the defense of the tank.

The ZTZ-99A tank is slightly taller and larger than the ZTZ-99 tank, but it is about 30 cm shorter than the 2.7 meters commonly used by NATO. After the bottom of the car is about 0.45 meters above the ground, the designer must design the various subsystems in the car body and turret within a height of less than two meters. The ZTZ-99A tank is equipped with a manual hydraulic transmission, so tanks over 50 tons can be easily shifted. It uses the steering wheel to turn continuously at any radius.

Product number                   07171

product name       Chinese People’s Liberation Army ZTZ-99A main battle tank

Bar code                  9580208071718

Product ratio          1:72

product type          Plastic Model Armor Kit

Model size              Length: 125mm Width: 60mm 

Total number of parts        40+

Metal parts             n/a

Etched parts           n/a

Film            n/a

Resin parts              n/a

Total number of offsets     3 sprues, lower hull, upper hull and tracks

Announced date                  2020-11

More description                 The kit consists of over 40 parts


Scale: 1:35

Barcode: 4820183313645

Series: WW II Military Miniatures

Box size: 290x190x45


In 1997, the F/A-18E/F Super Hornet fighter aircraft entered service with the U.S. Navy. The aircraft was developed to replace the cancelled A-12 stealth attack aircraft and the old F-14s. The Super Hornet is an evolutionary redesign of the Hornet. Its overall size has increased by 30% and its maximum take-off weight has increased by 6 tons. The numerous new designs greatly improve this aircraft’s capabilities. The U.S. Navy is about to be equipped with the more capable F/A-18E/F BLOCK III aircraft. In the new era, the Super Hornet will form the core of the U.S. Navy’s air power together with F-35. Now MENG releases this brand-new LS-012 Boeing F/A-18E Super Hornet model kit licensed by The Boeing Company. The finished model will be 377.9mm long and 273.4mm wide.