Russia T-72B1 main battle tank (attached touch-1 additional armor) 00925

product description:
The T-72 was the second new main battle tank produced by the Soviet Union in the 1970s. It is based on 172 project development and introduces some of the T-64A features. T-72 is the most widely produced main battle tank after World War II, second only to the T-54/55 series, and later evolved into the T-90 main battle tank.
Product number 00925
product name Russia T-72B1 main battle tank (attached touch-1 additional armor)
Barcode 9580208009254
Product ratio 1:16
product type Plastic Model Armor Kit
Model size Length: 632mm Width: 224mm
The total number of parts 1100+
Metal parts metal shaft, copper cable
Etched parts 1 piece
Film film n / a
Resin parts n / a
The total number of offset 26 sprues, turret and lower hull
Date of publication 2017-10
More description The kit consists of over 1100 parts
> the kit w / refined detail
> multi-slide moulded lower hull and upper hull
> individual tracks links
> Photo-eteched parts included

Saad missile defense system
Model: 01054
Model ratio: 1:35

product description:
The “Sade,” the last high-altitude regional defense system, was formerly known as the high-altitude regional defense system of the theater. It is an anti-missile system of the ground-based theater under the control of the U.S. Missile Defense Agency and the U.S. Army. It uses crash-kill kinetic energy killing technology. Missiles do not carry warheads, but rely on the kinetic energy of the impact to destroy enemy missiles. Prior to this, anti-aircraft and anti-missile missiles generally used high-explosive explosives and fragments to destroy the target missiles or warheads by fragments, which generally did not completely destroy the warheads but simply deviated them from their original orbit. Explosives or biological and chemical warfare agents in the warheads would still Scattered to the ground. The “collision of an anti-injury” can hit the target warhead at high speed, thus detonating warheads or the use of high-speed impact of heat to disable biological and chemical warfare agents. “Sade” can destroy “Scuds” and similar weapons.
Pursuant to a circular issued on July 7, 2016, the Pentagon announced that it is formally conducting a feasibility study for the deployment of the “SAD” missile defense system in South Korea. The scope of defense has been set to secure the security of South Korea so that the army of South Korea and its allies Free from the threat of North Korea’s weapons of mass destruction and ballistic missiles. After North Korea reported on September 5, 2016, that it had tested three “Aodong” ballistic missiles near the shores of Japan, China expressed its strong opposition to that and feared it would be detrimental to the region’s Regional security, but also increase a lot of controversy. ”
Product number 01054
product name Saad missile defense system
Barcode 9580208010540
Product ratio 1:35
product type Plastic Model Armor Kit
Model size Length: 340mm Width: 103.5mm
The total number of parts 750+
Metal parts metal tube
Etched parts 1 piece
Film film n / a
Resin parts n / a
The total number of offset 20 sprues, cab and tires
Date of publication 2017-10
More description >
Full multi-directional slide-molded cab. > Full drive train assembly complete with engine transmission, differential housing and suspension units.
> The main tires are hollow rubber with very good tread pattern
> The windshield and side win

North Korea “Mars” -5 short-range tactical missiles 01058
Model: 01058
Model ratio: 1:35

product description:
Mars-5 is a short-range ground-to-ground ballistic missile developed from the Soviet R-17 Elbrus. The Mars-5 missile is based on the Scud B missile. The Mars -5 has a range of 300 km, Can carry more than 1000 kilograms of warheads. North Korea purchased Soviet Scud-B from Egypt in the mid-1970s, improving projectiles, guidance systems and engines. Mars-5 began testing in 1984 and then began mass deployment in 1986 . Mars-5 uses the same launch vehicle as Scud-B, which is a vertical launch vehicle for North Korea’s imitation of the Soviet MAZ-543 chassis. However, such missiles can also be launched from the launch vehicle of a modified commercial vehicle chassis. North Korea is believed to have 12-15 launch vehicles and some 300 Mars-5 missiles, whose production ended in 1991-1992.
Product number 01058
product name North Korea “Mars” -5 short-range tactical missiles
Barcode 9580208010588
Product ratio 1:35
product type Plastic Model Armor Kit
Model size Length: 384.1mm Width: 89.5mm
The total number of parts 990+
Metal parts metal shaft, copper cable, pins
Etched parts 3 pcs
Film film n / a
Resin parts n / a
The total number of offset 22 sprues and tires
Date of publication 2017-10
More description >
Full drive train assembly complete with engine transmission, differential housing and suspension units.
> The main tires are hollow rubber with very good tread pattern
> The windshield and side windows are made of clear prts.
> Photo-etched parts included

Ukraine T-84BM “Bastion” main battle tank 09512
Model: 09512
Model ratio: 1:35

product description:
The T-84 Oplot-M, or T-84BM Oplot, is the newest and most sophisticated version of the T-84 family and is based on the previous T-84 Oplot upgrade, with more advanced armor attachment and new electronic countermeasures and Other improvements equipment. The most obvious external feature is the new PNK-6 large-scale peripheral sight.
T-84 Oplot-T, also known as T-84BM Oplot-T, is a model that is exported to Thailand. In order to meet the needs of equipment countries, there are some minor changes, such as different radio stations, additional air-conditioning. Thailand ordered 49 such tanks. According to the plan, all the vehicles ordered should all be delivered to the Thai Army in 2014. However, only 25 vehicles were delivered by 2017 due to the military conflict that broke out in Ukraine.
Product number 09512
product name Ukraine T-84BM “Bastion” main battle tank
Barcode 9580208095127
Product ratio 1:35
product type Plastic Model Armor Kit
Model size Length: 280.2mm Width: 107.3mm
The total number of parts 850+
Metal parts n / a
Etched parts 1 piece
Film film n / a
Resin parts n / a
The total number of offset 23 sprues, lower hull and turret
Date of publication 2017-10
More description The kit consists of over 850 parts
> the kit w / refined detail
> multi-slide lower hull, turret
> individual tracks
> photo etched parts included

China J-31 fighter (2014 Zhuhai air show) 01666
Model: 01666
Model ratio: 1:72

product description:
The Chinese name for the F-31 is “Yingying” and is a four-generation, two-armed medium-sized stealth fighter developed by AVIC Shenyang Aircraft Industrial Corporation.
The machine uses single seat, double hair, cape double vertical tail, the whole moving tail normal layout, large S-shaped inlet on both sides, equipped with embedded weapons cabin. With high viability, multi-tasking capabilities, excellent comprehensive support capabilities, high cost performance. The aircraft will be with China’s heavy stealth fighter J-20 formed with the level of.
At 10:32 on October 31, 2012, J-31 successfully made its first flight. In November 2014, the F-31 real machine debuted at the 10th China Zhuhai Air Show and performed its air show.
Product number 01666
product name China J-31 fighter (2014 Zhuhai air show)
Barcode 9580208016665
Product ratio 1:72
product type Plastic Model Aircraft Kit
Model size Length: 249.2mm Wingspan: 159.5mm
The total number of parts 110+
Metal parts n / a
Etched parts n / a
Film film n / a
Resin parts n / a
The total number of offset 10 sprues
Date of publication 2017-10
More description The kit consists of over 110 parts, 5 clear parts
– fuselage & wing with finely engraved panel lines

British Royal Navy “Royal Ark” aircraft carrier 1939 06713
Model: 06713
Model ratio: 1: 700

product description:
In 1934, Britain approved the funding for the construction of a new type of fleet aircraft carrier, and formulated the design proposal within the limitation of the aircraft carrier under the Washington Naval Treaty . Become the British Navy follow-up aircraft carrier prototype. Started construction in September 1935, when launched in 1937, it was named the “Royal Ark” and completed its service in 1938 . Taking into account the adverse sea conditions in the Atlantic , the ship’s aspect ratio is 7.6: 1, the hull is of high freeboard and the ship’s bow is designed to be enclosed, with two enclosed enclosed hangars included in the hull structure and the flight deck as a strength Deck, which is the United Kingdom and the United States, Japan designed the aircraft carrier difference. Huge use of welding process to save weight of the structure. The flight deck is equipped with downward-sloping overhangs on ships and ships to maximize the flight deck area. There are two hydraulic catapults on the front and three lifts. The lifts have two platforms on the flight deck and two hangar Running between the cumbersome. Bridge, Chimney The integrated island-style superstructure is located on the starboard side. Armored to protect against attack by 500-pound bombs on the side and on the deck of the lower hangar deck.
During the Second World War , Norway entered the battle in April 1940, and the “Royal Ark” dive bombers sank a German light cruiser . July 1940 Attack on the French fleet in Millsbridge Park, Algeria , with the British Fleet. During the war “Royal Ark” mainly cover the transport fleet in the Mediterranean .

The most famous battle of the Royal Ark took place in May 1941 to wipe out the German Bismarck . The “Royal Ark” torpedo bomber smashed its rudder to gain time for the British Fleet to finally sink Bismarck.

On November 13, 1941, after carrying the plane to Malta Island, the Royal Ark returned to Gibraltar at a distance of 50 knots and was hit by a German submarine to torpedo losses.
Product number 06713
product name British Royal Navy “Royal Ark” aircraft carrier 1939
Barcode 9580208067131
Product ratio 1: 700
product type Plastic Model Warship Kit
Model size Length: 348.2mm Beam: 41.2mm
The total number of parts 310+
Metal parts n / a
Etched parts 1 piece
Film film n / a
Resin parts n / a
The total number of offset 18 sprues and deck
Date of publication 2017-10
More description -hull split into two parts -Contains
display stand and engraved name plate-
Photo-Etched parts included-
Aircraft Wing includes:
Swordfish, FULMAR MK1, Blackburn SKUA