[Aero] Academy / Great Wall 1/72 F-15 Simple

Since the release of the recently released D-Corporation F-15K, the F-15 has been plugged into a new product, the Academy

The Great Wall 1/72 F-15 is underway at the same time. The academy products are also in the reviews, but the freshness is slightly lower

It looks like there are some people who have not been able to see the Great Wall products

 

Pods do not seem to make a big difference, but the expression of cooling intakes seems a bit awkward on the Great Wall side.

However, the optical instrument part of the AAQ-14 lantern pod is more

Because the Great Wall is movable, there is an advantage that it is the expression of the lens part, but there is some error in expression of the movable part.

The AAQ-33 sniper is only available in the Academy Eagle, and the Great Wall Eagle has a Data Link pod.

Fuel tank, side winder (Aka-9X, Great Wall -9L), Amaram (Aka-120C, Great Wall-120B) is two each.

The missiles are better seen on the Great Wall side with slides on the nozzle.

The length of the academy is 14 slides with GBU-38.

The manual says that you have to make 12 rounds in the Conferal Pylon, but not the Air Show.

The Great Wall is one of each of the GBU-12, GBU-15 and GBU-24.

The GBU-12 is actually eight rounds in practice.

The Academy Wheel is a way to put wheel hubs on the right and left side of the original tire components, but the Great Wall is a normal left and right division,

Self weight is converted.

The wheel detail looks better than the Great Wall, but the hub details are different.

The wheel geometry is an error because the academy is relatively accurate and the Great Wall side is a hub used by the F-15A / B.

 

In conclusion, if both products are simple, but if you prefer easy assembly at a low price,

If you want a more precise and more selective option, you might want to choose Great Wall.

Or maybe you could mix the two parts and get better results.

It is a matter of taste and choice, but both products are considered to be one level up product rather than existing Hasegawa products.

Today dispatch new product ~ Chibi Maruto Mutsu ~

(‘_ __ ___) ___ ___ 0

 

It is Chibimo (. · Ω ·)

 

We will inform you of new products shipped today (* و ∀ · *) – ☆

.

Chibi Maru 34 Chibi Maru Fleet Mutsu

 

The Japanese 12-battleship of the Chibi Maru fleet, Nagato’s second ship “Mutsu” which will be completed with this,

I made it into a product as a straight chimney after renovation in a warfare situation! (* ゜ ▽ ゜ ノ ノ ☆ ☆

 

Nagato type built as the forefront of the eighth fleet plan promoted by the Japanese Navy,

The second ship “Mutsu” is the main battleship commissioned after the Washington disarmament conference, after the dystocia ヽ (* ‘0’ *) Tsu

 

Products in the Showa era during the war, with the motif just before the explosion sank by accident,

You can line up with other Chibi Maru Battleships (灬 º ω º 灬)

 

There is only the kit at the end of the toilemar Japanese battleship, the shape reproduction has also evolved! !

Main gun barrel · It is reproducing the receiving part just under Σ (· ω · ノ) ノ!

Characteristics of Mutsu distinct from First Captain Gate · Window at the front of the bridge bridge,

We recreated the differences in the structure of the bridge bridge at the bottom using special parts \ (゜ □ ゜) /

In the vicinity of the rear watchhouse, the parts of the signal light which communicate with the following ship are attached only to Mutsu (☆. ☆)

The aircraft carries a ’99 type water surface reconnaissance aircraft’ molded in dark green color,

Unlike Nagato, a different machine is attached and you can differentiate it ╭ (· ㅂ ·) و ̑̑ Good!

 

Here I explain in detail with  ↓.

https://ameblo.jp/fujimi-co/entry-12289917980.html

https://ameblo.jp/fujimi-co/entry-12276974227.html

 

Please take a look! О (ж> ▽ <) y ☆

I want to go to the total fire service. want to go. It does not hit. Chibi Maru Military renewed 3 ton ton track of the Ground Self Defense Force! Review the seal, change the molding color ⇨ To the specification without painting! Package is the stage of total fire performance, Higashi Fuji Hataoka area. I tried to draw real on a heavy MAT target [not misplug] on the 4’s

Coming Soon – HA-1112 M-1L Buchón “Movie Star”

HA-1112 M-1L Buchón “Movie Star”The Spanish piston-engined HA-1112 M-1L Buchón fighters, under a licence built Messerschmitt Bf 109s fitted with British Merlin power plants became true movie stars owing to their appearance in the classic 1969 film Battle of Britain, later to appear in several other films, too. To be able to play the role of the German Bf 109E type, they had to be modified to a certain extent. The wing tips were squared off to portray the Bf 109E version typical feature, but also to maintain the total wing area, the wing was not cut off directly outboard the ailerons and a squared tip was added instead. The aircraft were also fitted with a mock up wing and fuselage gun barrels. Struts were added beneath the taiplanes, too. The Buchóns received livery of fictitious Luftwaffe units. During the filming, when the shortage of airworthy Hurricanes that should have appeared in large formations became evident, at least three Buchóns were painted to resemble Polish unit Hurricane fighters and these so-called Hurrischmitts played extras in the background.
The film version Buchón model comes on two sprues of grey resin which are different from those in the Spanish military verison model (offered under cat.no. SH72308 – HA-1112 M-1L Buchón). The customer will find for the filming purposes modified wing parts, a new forward fuselage section with mock up guns and also tailplane struts. The decal sheet brings markings for “Red 10” and “Yellow 15” fictitious German units planes and one British Hurrischmitt with MI-T fuselage codes and Polish checkerboard national markings on its nose.

Edition Special Hobby
Type Aircraft
Product Plastic kits
Scale 1/72

Coming Soon – kanón 3,7 cm KPUV vz.37M / 3,7 cm Pak M 37 (t)

Scale 1/35

Era Interwar

Product Plastic kits

Type AFV

Edition Special Armour

kanón 3,7 cm KPUV vz.37M / 3,7 cm Pak M 37 (t)

In the 1930s, the Skoda development department came up with a design for a modern 37mm A3 anti-tank gun, which was later accepted by the Czechoslovak army and used under designation 3,7cm KPUV vz.34, (KPUV standing for Kanon Proti Utocne Vozbe, or Anti-Tank Gun). The Skoda design team did not lie back on their laurels and developed a modernised type known as the A4 which gained excellent results while it was being tested and surpassed considerably the original 3,7cm KPUV gun. However, the new type used a different type of ammunition and therefore its breech had to be redesigned to be capable of using the earlier ammo as well. After that, nothing stood against the A4 gun being accepted by the Czechoslovak army, which used it under 3,7cm KPUV vz.37 designation. At that time, this weapon was the world´s best in its category. The production guns were supplied in several varieties, among which was also the Type M which could have been transported behind a motorised vehicles. The A4 guns were also exported to Yugoslavia, Bulgaria and Hungary, besides others. In 1938, nearly one thousand KPUV guns of both types were ready to defend Czechoslovakia, 390 of them were of vz.37 Type P and 300 of vz.37 Type M. The 3,7cm KPUV Gun vz.37 was capable to shoot through the armour of all Wehrmacht´s tanks. However, in the end, these guns were first used in combat by the German Wehrmacht, which, having realised the Czechoslovak guns were superior to German ones, put them into service under 3,7cm PAK 37(t) designation. And, how effective these guns were, soldiers of Poland, France, Belgium, Luxembourg and the Netherlands found out to their detriment. And only the attack against the Soviet Union made the 37mm guns obsolete as they were no longer effective against the new Soviet mid and heavy tank armours. Nevertheless, the guns remained on strenght almost until the end of the war. Amongst their users was also the army of the Slovak State, which had been built on the ruins of former Czechoslovakia, the Slovak Army deployed the 3,7cm guns also against the USSR, but with similar trouble as the Wehrmacht.

The model of this anti-tank weapon with pneumatic tyre wheels is made of grey styrene, the instructions offer liveries for guns used by the Czechoslovak army, German Wehrmach (in winter camouflage) and the Slovak State army. The decal sheet brings markings for the Slovak cannon while it saw service on the Eastern front, a double cross (Slovakia’s national symbol) and a good luck horseshoe.

SH48167 L-39ZA Albatros in 1/48 – camouflages in development.. The fact that we’re working on the new model L-39ZA Albatros isn’t a secret. The development is a bit complicated. Also the making of the camouflages and the decals is challenging. Becouse there are a lot of you asking about the model, camouflages and markings, here you can see the unfinished camouflages. There will be a czech, thai, algerian version

Newest Releases August, 2017

35235 WSS NCO at Kharkov


 

35236 WSS Greandier at Kharkov


 

 

 

 

35237 WSS Grenadiers at Kharkov Set
The pictures show the figure with 2 different heads.

 


 

H021 German Panzer Crew Head Set #1
This set includes 5 heads in 1/35 scale.


 

H022 German Panzer Crew Head Set #2
This set includes 5 heads in 1/35 scale.