German Tiger 1 heavy tank – the late type (with antimagnetic armor) 09540
product description:
Germany’s No. 6 tank E-type, usually referred to as “tiger” I-tank. It was because the German armored forces, in the months following their attack on the Soviet Union, had inadvertently developed the stubborn resistance of Soviet tanks, especially T-34 and KV-1. The tiger I was the first tank to have an 88mm artillery gun that has demonstrated its superior anti-aircraft and anti-armor capabilities. During the war, Tiger I was seen in almost all of Germany’s frontline battles. It is usually deployed in independent heavy tank brigade. Tiger has a strong psychological deterrent to many opponents. Its design is complex, uses a lot of expensive materials and production processes, and production takes a long time. Thus between August 1942 and August 1944, only 1,347 vehicles were manufactured.
Product number 09540
product name German Tiger 1 heavy tank – the late type (with anti-magnetic armor)
Barcode 9580208095400
Product ratio 1:35
product type Plastic Model Armor Kit
Model size Length: 239mm Width: 105.4mm
The total number of parts 510+
Metal parts n / a
Etched parts 1 piece
Film film n / a
Resin parts n / a
The total number of offset 16 sprues, lower hull and upper hull
Date of publication 2018-02
More description The kit consists of over 510 parts
> the kit w / refined detail
> multi-slide lower hull, turret
> individual tracks
> zimmerit included
> photo etched parts included
Russia BMO-T special armored transport vehicles 09549
product description:
BMO-T is Russia developed heavy armor protection dedicated personnel transport vehicles. It is specifically designed to transport flame jet soldiers, armed with RPO-A series of portable infantry flamethrower. The vehicle is to support infantry and tank cluster, its main goal is to heavy fortifications. BMO-T entered Russian Army service in 2001.
BMO-T T-72 main battle tank chassis based on the development. Remove the tank turret, re-developed the upper staff room. BMO-T has the same protection and main battle tank. In addition to the front of the body composite armor, but also equipped with explosive reaction armor. The internal crew room of the BMO-T features a Kevlar-lined interior to prevent fragments of the interior from cracking when the main armor is pierced. Vehicles are also equipped with nuclear, chemical and biological anti-three anti-fire extinguishing system and automatic suppression system.
This heavy armored van uses a 12.7 mm overhead remote machine gun. The car can carry a total of 32 piggyback RPO-A “Kashmir” series of flamethrower, after the launch can be discarded.
The BMO-T has two crew members, commanders and pilots in the front, and a crew cabin capable of carrying seven soldiers in the rear. Passengers pass in and out of the hatchway on the roof or behind.
Product number 09549
product name Russia BMO-T special armored delivery vehicles
Barcode 9580208095493
Product ratio 1:35
product type Plastic Model Armor Kit
Model size Length: 200mm Width: 114mm
The total number of parts 900+
Metal parts n / a
Etched parts 1 piece
Film film n / a
Resin parts n / a
The total number of offset 24 sprues, upper hull and lower hull
Date of publication 2018-01
More description The kit consists of over 900 parts
> the kit w / refined detail
> multi-slide lower hull
> individual tracks
> photo etched parts included
1/35 Russia BMR-3 Armored Minesweeper 09552
product description:
In the early days of the war in Afghanistan, the Soviet Union started the development of a special “BMR” series of armored mine-clearing vehicles that specialize in the exclusion of various types of mines and explosive devices. BMR-1 was introduced in 1982 and BMR-2 was commissioned in 1985. The T-72-based BMR-3 armored mine-clearing vehicle was successfully developed in 1995 and equipped with troops in the same year.
The BMR-3 is equipped with a KMT-7 mine-sweeper that opens up the way for minefields with pressure-sensitive mines and floor-mounted mines. Drum mine cleared minefield channel width of 2 × 800 mm. The speed at demining is 12 km / h, which can reach 1 meter deep waters. Submerged equipment installed in the dive depth of 5 meters, a width of 1000 meters, the flow rate of 2 m / s waters. The car is equipped with a 12.7 mm anti-aircraft gun, the body has three shooting holes (one on each side of the body, behind the body 1). Passenger life protection supplies and equipment, including food, water, water heater, food heater, personal hygiene facilities and air-conditioners, allow occupants to work in the vehicle for 48 hours.
Product number 09552
product name Russia BMR-3 armored minesweeper
Barcode 9580208095523
Product ratio 1:35
product type Plastic Model Armor Kit
Model size Length: 298mm Width: 126mm
The total number of parts 1000+
Metal parts copper cable, brass wire and chain
Etched parts 1 piece
Film film n / a
Resin parts n / a
The total number of offset 26 sprues, lower hull, upper hull and turret
Date of publication 2018-01
More description The kit consists of over 1000 parts
> the kit w / refined detail
> multi-slide lower hull
> individual tracks
> photo etched parts included
1/48 British “sea fox” carrier fighter 05808
product description:
Sea Vixen is a two-tailed, dual-fighter jet developed by Hawker Sidley in the late 1950s. Is the British naval aviation first swept wing, with a complete system of weapons, with missiles as the main weapon carrier-based fighter. Its maximum speed can reach 936 km / h.
“Sea Female Fox” is the first British carrier-based fighter with a complete weapon system. Its AI.18 air interceptor radar was developed by GEC and has a range of about 32 kilometers. The pylon under the wing can carry up to four Firestreak air-to-air missiles, or a total of 907 kilograms of bombs. There are also two under the nose Rocket launchers, there are 28 50 mm empty rockets inside. Later improvements (FAW-2) also had the launch capability of Red Top air-to-air missiles and Bullpup ground-to-air missiles. Red-head missile is the development of flames.
In 1972, the last “Sea Female Fox” squadron was dissolved. The F-4 fighter introduced from the United States replaced its mission.
Product number 05808
product name British “sea fox” carrier fighter
Barcode 9580208058085
Product ratio 1:48
product type Plastic Model Aircraft Kit
Model size Length: 353mm Wingspan: 324mm
The total number of parts 140+
Metal parts n / a
Etched parts 1 piece
Film film n / a
Resin parts n / a
The total number of offset 7 sprues, lower fuselage and upper fuselage
Date of publication 2018-01
More description The kit consists of over 140 parts
– fuselage & wing with finely engraved panel lines
1/144 Japan Cang Long attack submarine 05911
product description:
Cang Long-class submarines for the Japanese Maritime Self-Defense Force in the 21st century, the latest of a submarine, the first Cang Long (SS-501) by the Mitsubishi Heavy Industries Kobe Shipyard responsible for the construction; is the first Japanese Maritime Self-Defense Force mass production using special Lin Engine (AIP) system of countries. The Cang Long-class submarine is the Japanese in World War II, the largest tonnage to build a submarine, No. 1 ship Black Dragon and No. 2 ship Yunlong also inherited the name before World War II to build Cang Long and Yunlong aircraft carrier.
Product number 05911
product name Japan Cang Long attack submarine
Barcode 9580208059112
Product ratio 1: 144
product type Plastic Model Warship Kit
Model size Length: 583mm Width: 64mm
The total number of parts 40+
Metal parts n / a
Etched parts n / a
Film film n / a
Resin parts n / a
The total number of offset 2 sprues, lower hull and upper hull
Date of publication 2018-01
More description the kit consists of over 40 parts
– contains display stand
1/72 E-50 self-propelled anti-aircraft gun 07124
product description:
E-50 dimensions in addition to the tilt angle of the armor plate almost the same as the tiger king. Armor plate with interlocking and welding body, making the body solid. The engine is a modified version of the HL234, a popular Maybach 230 with the Panther and Tiger King. The fuel injection unit delivers 900 horsepower and 1200 horsepower using a boost system. Tank fuel position, radiator and exhaust fan and Tiger similar structure. E-50 maximum speed of 60 kilometers per hour, universal design collection parts, two models of tanks can be produced in the same production line, so the same kind of parts assembly.
Product number 07124
product name E-50 self-defense anti-aircraft gun
Barcode 9580208071244
Product ratio 1:72
product type Plastic Model Armor Kit
Water-paste coating Wehrmacht
Model size Length: 132mm Width: 535mm
The total number of parts 40+
Metal parts n / a
Etched parts n / a
Film film n / a
Resin parts n / a
The total number of offset 2 sprues, upper hull, lower hull, turret and tracks
Date of publication 2018-01
More description The kit consists of over 40 parts
