☆ Information for Reproduction ☆
It is news of product which we re-produced because of popularity!
1/700 ship NX1 Japanese Navy Battleship Yamato
The motif is the final time (in 1955) when the anti-aircraft gun was added more than the Battle of Leyte.
You can reduce the 25 mm single machine gun significantly and reproduce the appearance of adding a large number of 25 mm triple machine guns
It is designed with a snap fit type that does not require adhesive, and it is a series with a specification that sets it apart from conventional kits.
You can easily enjoy the realistic result by lowering the ship model hurdles.
The Ship NEXT series is a plastic kit that makes it easier to create a ship model, yet realizes realistic results.
◆ By molding that each part color-coded, painting unnecessary
◆ We adopt division method that combination of parts is inconspicuous.
◆ Snap kit which does not need adhesive ◆ The
seal which reproduces the coloring of the small part is attached.
◆ We can reproduce model on the sea if we remove under the water line.
Please make it by all means
*************************************************************************************
Half track illustration, decal under development!
Today is the show for half truck package illustrations.
It will be written by Mr. Takeshi Kurokawa again this time.
It seems to be a product of the package that the impression is quite different even in the half track
First release
And we introduce decals under development
Please note that the actual product will be further modified.
At first we introduce decals for unit
From what number sets became set
We collect to rose We can enjoy from easy school to obsessive school.
Troops for extra decals greatness has been enhanced rather.
Not only disaster dispatch specifications but also markings for maneuver training and memorial events
The product comes with two sets of this decals.
If you know the recent Fujimi attention decals
It may have already been guessed, but we have also reproduced Tepra in the car this time.
(That red one may be next to Tokyo-◯-kun- )
The brake lamp is the first attempt this time
I’m leaving the red part of the storefront state
If black is painted below, it will be off, and if red is painted below, it will be in the state of store and freedom.
It is police officer decal following.
We have also recorded a lot of notations that were also set.
As a bonus, also decals of siren amplifier
The police officer comes with 2 cars and 2 sheets of this decal.
Release is July! !
Development is in progress.
We will notify you of new product information at any time ~
See you next time!
*************************************************************************************
【If you are not good at insects, please be careful!
We have received a test shot of the large mantis, so let me introduce it!
Parts are here!
Products will be green- colored plastic parts!
Then start assembling!
I’m pretty anxious about what I can do for bugs
At first from the head!
Up here ↓ ↓
The feeling of being a compound eye is real …
It feels like this with antennae.
It already only looks like a mantis …
Next is the chest and abdomen.
Well, inside is also real …
I will connect with the head
I will put a feather in this hole
Then assemble the legs!
The projections are reproduced realistically.
It hurts a little when I touch it (laughs)
The legs can be bent!
There are two types of angles in the middle leg
My stomach is…
I am sick and too real to lose my words …
Completed! !
The legs and head are movable, so various poses are possible!
The whistle is a replaceable, and a transparent whistle can be used to reproduce the threat pose.
Sher! !
The painted finished product looks like this!
It’s even more realistic!
Okuma Mankiri will be released in August 2019!
looking forward to! !
I’m not good at insects
*************************************************************************************
New Product Information for June
It was hard to go to work with great rain and wind when commuting this morning,
In the afternoon it stopped raining and the weather was pleasant.
By the way, today I would like to introduce a few new products to be released in June.
1/700 Special Series No. 91 EX-2
Japanese Navy Light Cruiser Agano Type
Etching parts (w / 2 piece 25 mm machine gun) is
※ The image will be under production.
We plan to release the series in the future,
It has become a product that collected upgraded parts.
Want to upgrade your favorite ship with this product ?
Contents of the recording
Dedicated etching parts
Handrail, rattle, loop antenna, crane, boat david, catapult
Includes flight decks and bow flags.
1/700 special series
・ No. 91 Agano / Noshiro
・ No. 92 Yagin 1944 / Sake
・ No. 93 arrow 1945
Corresponds to
w / 2 piece 25 mm machine gun 97 type 25 mm machine gun
Here is a two-piece configuration, painted color reproduction of gunmetal of the barrel and the base, and reproduction is
It is easy to do.
It also comes with two bulletproof plates and a part of the ammunition box for the triple gun.
This item is shipped on June 17.
The upgrade series will continue, so
Please wait for the follow up
*************************************************************************************
New Product Information for June
I ran for a long time on Sunday. Today my feet don’t go up …
Well, today is the new product scheduled to be shipped on June 26,
1/72 C series No. 15 Aichi water reconnaissance aircraft This is an introduction of the cloud .
Currently, we are working hard on packages, instruction, etc. for shipping!
This time, the finished product of Suiyun is finished, so it is an introduction! !
When I saw it for the first time, a voice came out instinctively …
And, it’s very cool …
The dive brake can select the open / close state.
In addition, the type with a slit after refurbishing is also partized.
Dolly parts are included, and you can enjoy more realistically even during the exhibition!
1/72 C series No. 15 Aichi water reconnaissance aircraft 瑞
It will be shipped on June 26 ! I would like to introduce a variety of follow ups in the future
*************************************************************************************
New Product Information for June
We send production document this time!
Please use it as a reference when making the “1/72 87 high-emission gun” currently on sale from the Fujimi model!
◆ 1/72 military series No. 9 Ground Self Defense Force 87 type self-propelled high-emission engine gun
◆ October 2018 release
◆ Procurement price per unit 1,400 yen (excluding tax)
[The color of the gun barrel]
The barrel end of the 87AW is black.
Gun meta specified in the instrument.
The barrel is clear and two-color camouflage. The
boundary is the difference between the end of the muzzle brake and the barrel of the
shot.
【Interior color of rear basket】
It is well-painted with camouflage color.
Both the mesh and the back of the car.
The maintenance members of the High Priest Command, the work is polite!
As a model, the paint film peels off and the rust prevention paint which gives a face off is anxious …
quite red!
【Color of radar】
The tracking / searching radar surface is always green.
Even if the column is brown, only the radar surface is green.
This is also true for the 2018 96-5442 (car No. 22).
By the way, at this time, only the barrel is equipped with the one of 96-5175 (08) (; ‘∀’)
When you want to make an irregular individual, it is for reference!
As mentioned above, it was the production data from the Fujimi model!
If you are making 87AW, if you are going to make it, please refer to it!
*************************************************************************************
New Product Information for June
We will announce new products shipped today
Ship NEXT16EX-1
Japanese Navy Akizuki type destroyer Akizuki / first month Showa 19 / Keiichi No. 1
2 sets
Special specification (with genuine etching parts)
Comes with precision etching parts not sold separately
It can not be expressed by injection
Reproduction of delicate ships with etching parts Etching parts for
2 minutes are included
Nippon Navy Akizuki type destroyer Akizuki / first month Showa 19 / Keiichi No. 1 operation support 2 ships set
Detail up point
handrail that has been represented , No. 13 ID, No. 21 ID, skid beam, detonation loading, armor, davits, rattal, flagpoles, single armor guns, torpedo screws, shields, anti-air sights, chimney circumference Includes details and more
Please take a look at everyone’s hands ~
It was over!
*************************************************************************************
New Product Information for June
I had a sore throat and got a wrinkled voice.
There is no proof that I am worried about my throat to do anything.
Health is important
Today is the introduction of a new product that was shipped today!
G-grade joins the popular car NEXT series Hustler !
We added steel wheel / visor / monocular camera which is the feature of G grade with new mold!
Color is two colors development!
Phoenix Red Pearl
Active yellow
□ The product reproduces a standard figure with a two-wheel drive G grade motif.
□ “Steel wheel / visor / monocular camera (indoor front part)” as G grade exclusive parts
Add new parts.
□ The body color adopts a new molding color set for exclusive use,
A glossy texture is expressed even without painting.
□ Completed size Total length 144mm Total width 74mm Total height 75mm
(Full width includes side mirror, total height includes antenna)
□ Sheet piping of white setting, seal that reproduces the instrument panel is attached.
I’m going to have a smooth and smooth color!
As a citizen of Shizuoka prefecture, it is nice to have red
1/24 Car NX11 Suzuki Hustler (G / Phoenix Red Pearl)
[4968728066196] 1/24 Car NX12 Suzuki Hustler (G / Active Yellow)
Recommended retail price: 4,300 yen (excluding tax)
As it is shipped today, I think that it will begin to line up in the store from the weekend.
Please check it by all means
Share/SAVE/PRINT/OR SEND AS EMAIL:
Like this:
Like Loading...
You must be logged in to post a comment.