Fuji Mistini: Battleship Yamato Central structure 1/200

Do you collect all of you?  ?

“Fuji Mistini”


The third will be released in June.

Battleship Yamato Central structure

Publish a test shot ~! !

There are still some parts that are not perfect in shape or engraving because they are still test shots.

Please noteLet go

World’s largest battleship Yamato-type built by the Japanese Navy

Injection kit of the central part of the battle defense zoneExclamation mark

The collection kit following the “Kanbashi” released in December 2018 is a big scale of 1/200!

-Commercializes the range of “chimney, high angle cannon, mast, and aft bridge” following “ship bridge” on sale. 
-The product is based on the figure of the Yamato-type battleship “No.

Assembly is adhesive.

Although the photograph is still a test shot, molding color etc. is different from the product version,

Since each color is colored plastic molded, it will have an atmospherey finish even without painting!

The molding color is the ship NEXT series

We adopt gray that imaged “the navy navy ship blue color” getting popular.

-Equipped with two No. 13 probes on the mast. Delicate molding by 2 piece structure.

The mast also has a small search light! ! !

-Equipped with six search lights, the lens surface is a separate body clear molded parts.

-Six high-angle guns without shields (not included in this product) 

-Basic information 
Number of parts (including bonus parts) 174 points -Completed size 183mm in the front-rear direction 105mm in the width direction 105mm height

-In the case of 1/200 scale, 
reproduce the rib on the surface in contact with the inner wall and structure of the special molding point · high angle cannon seat. 
-The 12.9 cm continuous high-angle artillery of the type 89 is designed to allow the elevation angle. 
・ The 94-type high-emission system is dedicated to the type without a cover in the range finder section.

 Express the difference with the bridge. 
・ The range finder of the rear bridge can be rotated. 
・ The structure like the electric circuit cover by the side of the aft bridge is shaped without leakage.
-Also comes with a seal to reproduce the details! 
・ The battle flag on the mast, and the middle commander flag showing the commander seat at the time of the operation No. 1 are recorded. 
・ We prepare white line of mast part, white line on high angle artillery barrel, enemy plane identification figure of the gun seat etc. 
・ We collected “Kimizu mark on the side of chimney” non-reason law Tenku “, chimney.



Package illustrations are completed in a little more!

elephantIt will be shipped on June 27.

looking forward to~!

Giraffe Camouflage Paint Mask Set ver.1 Axis WWII Armor 1/35

Suggested scale: 1/35

Re-usable die-cut camo mask set

Suitable for various Axis tanks – Grille, Marder, Hetzer, Panther, Italian armor and others

SKU: 35/827-078

The set includes a sheet of masks (shown in the picture). The masks are made from thin masking tape, which is easy to be peeled off and doesn’t leave any stains. The tape is tested on clear and painted model too. If carefully removed after painting, they can be used over and over again. It is flexible and easily applied over curved surfaces. Semi transparent for easy and accurate placing.

Giraffe Camo

was applied during the late months of the Second World War and was not the standard pattern used on the German and Italian Armor. Giraffe camo was used on smaller vehicles predominantly. Hetzer, Grille, Marder as well as some Italian tankettes were the most popular applications. However, such camouflage is suspected to be used on larger vehicles such as Panther tanks, StuGs and Jagdpanzers. Nevertheless, Sd.Kfz. 138 is the vehicle that became famous with its Giraffe camo, mostly because of some reference photos showing clearly the pattern used on such tank.


replicated the skin of a Giraffe, although on the reference photos that survived it is unclear were the edges sharp or soft-edged. This paint masks set by DN Models allows for both applications. If you’d like to make sharp edge camo patter the masks should be placed directly over the surface, while if you’d like to replicate softer edges, some spacing can be used between the surface and the masks.