Commercialization plan of 1/24 full new car model domestic car which began to move around autumn of 2013 .
At that time, it was just after the release of the previous work TT series Sumber and 430 sedan, and the sales were also good, so I was considering various types of cars with a reasonable price in IKEIKE mood, but the company side is fairly responsive.

It was also supposed that Aoshima at that time had a tendency to rush to the supercars route, so my proposal which only looks like a plain and frank car model seemed to be a very dull and uninteresting thing for the management side maybe…
There was also speculation of such a company, and I proposed a full new domestically produced car lasted a couple of points, and at last it was approved pro box / succeed .
So, although I had a favorite that I wanted to commercialize earlier than the Pro box, that is a trick forever …

Professional box / succeed who started planning development though twists and turns. Since it was long, I will make it prosaque, but at the initial schedule I announced at the Tokyo Hobby Show in 2015 and was scheduled to be released.

However, the actual announcement is the Tokyo Hobby Show in 2017 this year.
It is all two years behind. Why did it take two more years

Once the new project is approved within the company, it will be first covered by the editorial application, but it has been going smoothly up to this point.
Since the theme is prosaque, I do not have trouble with the interview. I interviewed the fact that the actual car was received by my friend’s car shop or completed the 3D scan with a new car that entered a cooperating company.
So let’s move on to design drawings. And “I’m sorry ahead to complete the product here” at the timing company indicated by the interruption of the work design is becoming interrupted the first round of the super car was a rush at that time, and then be followed by the interruption of force majeure at the stage of design drawings, I wonder somehow that the In the situation where the 3D drawing designer at that time quits the company in the place where my thought has fallen …
At that time the company was totally taken care of by the supercar and the domestic car was feeling cold and was felt. Around 430 Sedoguro sedan ‘s Bloham is also in danger.
Well, I’m sure I will disappear from the project of Mr. Prosak as it is … and half a give up mode.
At the same time sanitra was released from Mr. Hasegawa, it was a wonderful crucifix. I also thought that I changed jobs as it is, but the state of Aoshima ‘s supercarritic path has changed unexpectedly. I think that the ☆ model car series was around the beginning.
Then it will be struck from the company like returning the palm this time. ” Pro box / Succeed is progressing ”
Wait a moment for a while. I do not have any fucking what’s going on. Initially the development was interrupted due to the circumstances of the company, and unnoticed the designer was retired and stopped … 
and, individually it was dissatisfied, but at that time do not talk. It started moving toward commercialization again.

Despite such twists and turns, this time Suzaku finally became a virgin work by a new-design drawing designer Y who joined last year.
In recent years it has become common to make a large body of body shape by 3D scanning, but still it is a reality that putting deformation in each company or modifying it to make it three-dimensional. It is the same for our company, but for this time we made it in the direction to destroy the deformation and make it three-dimensional. Although this is a preference for diving, I personally think that it was okay to deform the minimum as necessary. Reflections about that will be reflected in the new mold which is already in operation next year.

 
Although there were various, commercialization of Pro box / Succeed which finally became a request.
Since preparation has been completed successfully, please have a look.

The ☆ model car No. 65
1/24 Toyota NCP 160 V
Pro box ’14

First of all, package

Decal 

Window frame masking seal

Prototype finished product

Tail

Then Sakushi

The ☆ model car No. SP
1/24 Toyota NCP 160 V
Succeed ’14

First of all, package

Decal ~ is common to pro boxes

Window frame masking seal – also common to pro boxes

Prototype finished product

Tail

It is like this.
Prosak will set as early as next week, our company will be shipping.
In the fast place I think I will line up in the shop in the middle of the week.
I managed to make it for Christmas. How about a Christmas made by a couple occasionally

 
Next

Since we have finished preparing other December selling car models in addition, Baban and Ikimashou

The ☆ model car No. 60
1/24 Honda AA City Turbo II ’85

First of all, package

Decal

Window frame masking seal 

Prototype finished product

Tail

It is like this.
In the ☆ model car series is a minority Honda car. But it is a deep-rooted popular first city.
Since it has been a while since then, please hold me as soon as possible.

 
High next ~

The ☆ model car No. 62
1/24 Nissan Y 31
Cedric / Gloria
V 20 twin cam turbo

Gran Turismo SV ’87

First of all, package

Decal

Window frame masking seal ~ prototype finished product ~

Tail

It is like this.
This Y31 is also a selection formula from Cedric / Gloria along the recent flow.
Also, we are plating grill together with Sedogro. Since plating of gloria grill is the first in Japan, 
it is a decal that
everyone of the Prince party will check it by all means, but although the division of SEDOGLO is a motilon, we also add 5E-AT and SFC etc. of the latter period in OMAKE came. This Y31 also has many requests to port specification after putting Yokohama number next to Leopard, but this time I tried to reproduce the number of public relations car at the time of the new car.

New products introduced with affection like this, Y31 Grants has already shipped our company. Prosak, City is scheduled to ship by the middle of next week. Since I think that it will line up at the shop front before Christmas, please come to the nearest plastic model shop by all means ~

 
, The recent ☆ ☆ model car series is progressing to standardize “aluminum number plate” as a standard.
The number plate only for the characters in the decal is for that purpose.
Please try using it by all means