special hobby UPDATE FOR NEW KITS AND News FOR December 2017

CMK sets for model Nakajima Ki-84 Hayate / Frank 1/72 (Hasegawa)

 
 CMK has prepared several resin sets for the older but still good model Ki-84. Under catalog numbers 129-7374 you can find interior, cat.no. 129-7375 offers both truss and wing armament, 129-7376 rudder vertical tail, stabilizer and rudders horizontal tail surface and ailerons. In the Quick & Easy line, you can find a seating under Cat. No. 129-Q72288 .
You can buy all the presented sets at Bratislava Zima or at our e-shop.
—————————————————————————————————————

SH32065 Fokker D.II 1/32 – test piece molding of small parts

The slightly delayed Fokker D.II waits for moldings of this form. We need to tweak the last few details to make it perfect. Thanks to this, Fokker will not be among the premier novelties of the Bratislava Winter. We are sorry. But we will offer you a lot in Bratislava. Meanwhile, see the test pressings.


SH72370 HAL Ajeet Mk.I "Indian Light Fighter" – a look at the novelty we bring to the Bratislava Winter

HAL Ajeet was licensed in India by Folland Gnat. The Indian Air Force has deployed it into several conflicts with Pakistan. The model is molded from steel molds, three frames of gray plastic and the clear parts frame are complemented by full-color instructions and decals from the Italian cartographer. Decals offer a choice of four attractive camouflage.
Premier we will be selling this model at Bratislava Winter, along with the Delta 1D / E and the CASA C-212-100


 

In the last month of 2017, together with our newsletter, we bring another new model of the new generation of Steel Hobby new generation. This is P-40 Warhawk / Kittyhawk. We will now offer you this model in two versions. For the P-40 Warhawk / Kittyhawk models we have also prepared CMK resin sets, some of which we offer you in this newsletter, others will follow in the first months of 2018. As of October news, the Biber mini bus in the 1/72 scale, we have prepared a transport lift Biber Trailer. The British RP-3 missiles became the armament of many aircraft during the Second World War and contributed significantly to the victory of the Allies. On the scale of 1/32 we are now offering you molded plastic.
Before looking at the individual plastic models and resin sets in detail, I would like to thank all business partners for their cooperation this year. I believe it will be even better to continue in the years to come. I thank all modellers for the favor they give us and our models.

 

P-40N Warhawk 1/72

Art.No. scale barcode
100- SH72374 1/72 8594071086237

The P-40 Warhawk / Kittyhawk fighters were USAF and Allied air force units throughout the Second World War. In many versions, they fought on all battlefields of the Second World War. As a result, these fighters and fighter bombers fly with the characters of many airmen and many interesting colors.
The P-40N was the latest serial version introduced into the equipment. She was in the USAF units mainly in the Pacific and the China-Indian battlefield. In the Commonweath Air Force, this version was named Kittyhawk Mk.IV. RAF deployed this version in Italy, RAAF and RNZAF then in the Pacific.
The P-40N consists of three gray plastic moldings. It is complemented by a frame of clear parts. It offers overlapped cabins divided into individual parts. This, and because the two parts are detachable, the model can be built with an open and closed cab. The small parts frame contains two types of propellers, with narrow / for P-40 early versions / wide / for P-40 later versions / propeller blades. It is the only P-40 model in the 1/72 scale that reflects the different propellers. The frame offers other alternative parts, such as two types of additional tanks or exhausts.
The decals offer two American and one Dutch P-40N. The first American machine is embellished on one side of the engine cover by the name and on the other by the artem. Flying at the famous 49th FG. The second US machine flew on the Indian Fight at 80 FG. This unit adorned the bow of its P-40N Skull Sketches. The last machine, named SNAFU, was flown by the Dutch East Indies in New Guinea with Dutch striped characters and with the letter H on the tailgate. He continued in service after the war, and the 1947 instructions also offered him.


 

Kittyhawk Mk.IA 1/72

Art.No. scale barcode
100- SH72377 1/72 8594071086244

P-40D / E Warhawk was the first version to be equipped with a new version of the Allison F series engine (version P-40D carried four and P-40E six guns in the wing). The largest buyer, besides the USAAF, became the British RAF, which necessarily needed every suitable combat aircraft. Due to the inappropriate altitude of Allison engines without a turbocharger, the RAF did not assemble it on the European battlefield, but under the designation Kittyhawk Mk.I and Mk.A on the African battlefield. Kittyhawky was also supplied with RCAF, RAAF and RNZAF. Canadian Air Force has deployed against the Americans over the Aleutian Islands. RAAF and RNZAF in the Pacific, Australians on the P-40 fought in Africa.
Model Kittyhawk Mk.IA consists of two gray plastic moldings. It is complemented by a frame of clear parts. It offers overlapped cabins divided into individual parts. This, and because the two parts are detachable, the model can be built with an open and closed cab. The small parts frame contains two types of propellers, with narrow / for P-40 early versions / wide / for P-40 later versions / propeller blades. It is the only P-40 model in the 1/72 scale that reflects the different propellers. The frame offers other alternative parts, such as two types of additional tanks or exhausts.
The decals offer a shark-mouthed ornate machine of the famous No.112 sqn. RAF bearing the name London Pride on the hull. Another machine is the RAAF machine named Race flying in New Guinea. The last Canadian Kittyhawk from No 111 (F) Sqn. RCAF.

Great, 3D prepared resin accessories for P-40 Warhawk / Kittyhawk models can be found below in this newsletter!

PREPARED MODELS 1/2018

Messerschmitt Me 209V-1 1/72

Art.No. scale barcode
100-SH72138 1/72 8594071086497


 

Blohm & Voss BV 155V-1 1/72

Art.No. scale barcode
100-SH72340 1/72 8594071086442


L-39ZA / ZA ART Albatros 1/48

Art.No. scale barcode
100-SH48167 1/48 8594071086039


 

1/72 Boeing B-17G – Bomb Bay Set for
Airfix kit

Art.No. scale barcode
129-7382 1/72 8595593125378

Detailed set of Pumps for the new Airfix B-17G.
ACCESSIBILITY: USA / WWII


 

1/72 Boeing B-17G – Bomb Aimer's Station Set for Airfix kit

Art.No. scale barcode
129-7383 1/72 8595593125381

The American B-17 bombers were equipped with great Norden sight. Not only can you find it in a detailed set of bombed-in workspace in the bow. Castings are for Airfix.
ACCESSIBILITY: USA / WWII


1/72 Boeing B-17G – Engine Set (port side engine, 1pcs) for Airfix kit

Art.No. scale barcode
129-7384 1/72 8595593125398


1/72 P-40 – Control Surfaces for Special Hobby

Art.No. scale barcode
129-7386 1/72 8595593125404

Special Hobby launches new models of the American P-40 Warhawk / Kittyhawk. Together with them comes the sets for these models. This set allows you to move the controls. The castings include flaps, ailerons, directional rudders, and horizontal tail surfaces divided into stabilizers and rudders.
ACCESSIBILITY: USA / WWII


1/72 P-40N-5 through N-40 Seat for
Special Hobby Kit

Art.No. scale barcode
129-Q72294 1/72 8595593125428

For the new models P-40 late version N from Special Hobby, but not only for them is cast cast seat Ta does not have lacing belts. Master seats originated in 3D modeling and 3D printing.
ACCESSIBILITY: USA / WWII


 

1/72 P-40 Wheels – Diamond Tread for Special Hobby Kit

Art.No. scale barcode
129-Q72295 1/72 8595593125435

The set includes completely new wheels with diamond design. Wheel disks are cast separately and the set offers a choice of discs with or without covers mounted. Master Bike originated in 3D modeling and 3D printing.
ACCESSIBILITY: USA / WWII


 

1/72 P-40 Wheels – Block Tread for
Special Hobby Kit

 

Art.No. scale barcode
129-Q72296 1/72 8595593125442

The set includes completely new wheels with a rectangular tread pattern. Wheel disks are cast separately and the set offers a choice of discs with or without covers mounted. Master Bike originated in 3D modeling and 3D printing.
ACCESSIBILITY: USA / WWII